MattMill Läuterhexe 1000, suitable for taps with 3/4 "male thread

Item number: 60001000

The innovative, patent-protected MattMill Läuterhexe is used for effective, safe and clean refining while brewing. Rinse before first use in order to remove any existing production residues. The cleaning can be done in the dishwasher. All components are resistant to common cleaning and disinfecting agents and boil-proof. The installation can be carried out in all vessels suitable for lautering. The Läuterhexendrahtspirale can be laid in any form. However, crossing one over the other or sharply kinking is to be avoided. The larger the laying radius, the finer the refiner slots.

The MattMill Läuterhexe 1000 fits - loose, laid in full circle - into a container with a diameter of approx. 37 cm. An adaptation to the individual container size can be done by shortening the wire spiral. An Inox cutting disc is suitable for this purpose.

Total length: 1,000 mm

Mounting the T-piece in the container: A hole with a diameter of 22 mm is required. The hole should be about 20 mm above the inner tank bottom. If the larger hole diameter already exists, use a washer between the T-piece and the container wall. Delivery without bucket and without drainage tap.

Category: Lautertun


33,49 €

including 16% VAT. , plus shipping



The innovative, patent-protected MattMill Läuterhexe is used for effective, safe and clean refining while brewing. Rinse before first use in order to remove any existing production residues. The cleaning can be done in the dishwasher. All components are resistant to common cleaning and disinfecting agents and boil-proof. The installation can be carried out in all vessels suitable for lautering. The Läuterhexendrahtspirale can be laid in any form. However, crossing one over the other or sharply kinking is to be avoided. The larger the laying radius, the finer the refiner slots.

The MattMill Läuterhexe 1000 fits - loose, laid in full circle - into a container with a diameter of approx. 37 cm. An adaptation to the individual container size can be done by shortening the wire spiral. An Inox cutting disc is suitable for this purpose.

Total length: 1,000 mm

Mounting the T-piece in the container: A hole with a diameter of 22 mm is required. The hole should be about 20 mm above the inner tank bottom. If the larger hole diameter already exists, use a washer between the T-piece and the container wall. Delivery without bucket and without drainage tap.


Shipping weight: 1,20 Kg
Product weight: 0,74 Kg
Contact
Question on item


Contact