Bung valve with pressure gauge up to 2.5 bar with nut with 3/4 "internal thread, conversion kit for tap heads type HIWI and MICROMATIC

Item number: 71089934

Conversion kit for almost all dispensing heads for beer to the bunging device,
allows automatic regulation of the container pressure, adjustable from 0-2.5 bar,
automatically deflates when the set (proof) pressure is exceeded,
additionally manual airing via pull ring

Category: Press CO2 into other barrels

inklusive Lippendichtungen-Typ

44,99 €

including 16% VAT. , plus shipping

Shipping time: 3 - 7 workdays



Conversion kit for almost all dispensing heads for beer to the bunging device, allows automatic regulation of the container pressure, adjustable from 0-2.5 bar, automatically deflates when the set (proof) pressure is exceeded,
additionally manual airing by means of pull ring.

Including 2 lip seals clear or 2 lip seals red for almost all tapping head brands. The lip seals are cut open so that CO2 can escape through the tap head. The lip seals originally installed in the tap head serve as check valves and must be replaced with the new,
cut-open seals for spotting.

For dispensing heads without beer stopcock, we recommend the blind nut 5/8 "(item no .: 70091006) to close the beer outlet at the dispensing head during fermentation with the dispensing head handle pressed down.

Shipping weight: 0,90 Kg
Product weight: 0,60 Kg
Contact
Question on item